Feature Summary
|
Form Factor
|
Proprietary size mezzanine module, fits basically into the 4HP (20.3mm) envelope of the CPU carrier board,
typically delivered as a ready to use assembly unit (including the CCM-BOOGIE, PC1-GROOVE or similarr CPU card),
mounting position right (on top of CPU board)
|
Host I/F Connector
(Bottom Mount to CPU Carrier)
|
- High Speed mezzanine connector suitable for CCM-BOOGIE, PC1-GROOVE and successor CPU carrier boards
- up to 4 x SATA 3G channels (RAID option)
- 4 x USB 2.0 ports
- 1.6 A maximum continuous current via 3.3V rail
|
SATA Usage
|
-
SATA1 (from ICH southbridge or PCH on CPU carrier board), bound to the optional internal cable connector SATA1,
please note that additional headroom is required beyond 4HP for this option
-
SATA2 and SATA3 (derived from the CPU carrier board secondary SATA controller), bound to the mSATA module
connectors PEMC1 and PEMC2, both channels operated either individually or as SATA RAID level 0/1 dual drive
-
SATA4 (not supported on all CPU carrier boards), bound to the optional internal cable connector SATA4,
option not available together with dual mSATA module sockets, please note that additional headroom is
required beyond 4HP for this option
|
USB Usage
|
-
USB1 & USB2 dedicated to optional USB type A cable connectors. Receptacle USB2 not available together with
dual mSATA module sockets. Please note that additional headroom is required beyond 4HP for USB cable connectors.
-
USB3 & USB4 wired to mSATA sockets PEMC1/PEMC2 for use with USB bound PCI Express® Mini Card modules
|
mSATA Connectors
|
-
Up to 2 x sockets (PEMC1, PEMC2), mechanically identical to the PCI Express® Mini Card specification,
suitable for mSATA modules complying with JEDEC MO-300B, or USB 2.0 based PE Mini Cards according to the
PCI-SIG specification
- Module size full (50.8mm x 29.85mm x 3.75mm) or mini (26.8mm)
- SIM card holder available as an option, assigned to PEMC1
- 1.6 A maximum continuous current via 3.3V rail (in total for both sockets together)
|
Cable Connectors
|
- SATA1 (option), SATA4 (option), for attachment of system internal SATA drives
- USB1 (option), USB2 (option), for system internal attachment of USB devices
|
Thermal Conditions
Environmental Conditions
Specials
|
- Operating temperature: -40°C ... +85°C (depends on mSATA modules in use)
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- RoHS compliant
- Coating, Sealing, Underfilling on request
- Long Term Availability
|
EC Regulations
|
- EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
|